Best In Malaysia Ceramic Infrared Heating Element

Ceramic infrared heating elements are efficient, robust heaters which provide long wave infrared radiation. The ceramic heaters and infrared heaters are used in a diverse range of industrial and engineering applications such as thermoforming heaters, packaging and as heaters for paint curing, printing and drying. They are also used very effectively in infrared outdoor heaters and infrared saunas. Ceramic elements produced by dpstar Maltec H include ceramic through elements, ceramic hollow elements, ceramic flat elements, and ceramic infrared bulbs.the Ceramic Infrared heating element, was created to maximize heater efficiency and performance while maintaining durability and design flexibility.  These heaters are capable of transferring up to 90% of their input as radiant energy, and maximum efficiency is reached when the emitted wavelength and the absorption spectrum of the material to be heated are optimized. dpstar is one of the best ceramic infrared heating element suppliers and manufacturer in Malaysia. You can visit us at www.dpstar.com.my

dpstar Maltec-T (Thermocouples Suppliers)

 
A Thermocouple is a sensor used to measure temperature. Thermocouples consist of two wire legs made from different metals. The wires legs are welded together at one end, creating a junction. This junction is where the temperature is measured. When the junction experiences a change in temperature, a voltage is created.There are many types of thermocouples, each with its own unique characteristics in terms of temperature range, durability, vibration resistance, chemical resistance, and application compatibility. Type J, K, T, & E are “Base Metal” thermocouples, the most common types of thermocouples.Type R, S, and B thermocouples are “Noble Metal” thermocouples, Thermocouples are known for their versatility as temperature sensors therefore commonly used on a wide range of applications – from an industrial usage thermocouple to a regular thermocouple found on utilities and regular appliances. dpstar provides many  years of high quality Malaysia manufacturing, research and product development for your temperature sensing needs. dpstar  manufacturers a tremendous selection of general application, mineral insulated metal sheathed, base metal, high temperature, surface temperature and multipoint thermocouples. dpstar famous Maltec-T is one of the largest leading manufacturer they produce high quality thermocouple and there are many other variety to choose from at http://www.dpstar.com.my.

Best Quality & Cheap Thermowell

A Thermocouple is a sensor used to measure temperature. Thermocouples consist of two wire legs made from different metals. The wires legs are welded together at one end, creating a junction. This junction is where the temperature is measured. When the junction experiences a change in temperature, a voltage is created.There are many types of thermocouples, each with its own unique characteristics in terms of temperature range, durability, vibration resistance, chemical resistance, and application compatibility. Type J, K, T, & E are “Base Metal” thermocouples, the most common types of thermocouples.Type R, S, and B thermocouples are “Noble Metal” thermocouples, which are used in high temperature applications (see thermocouple temperature ranges for details). Thermocouples are used in many industrial, scientific, and OEM applications. They can be found in nearly all industrial markets: Power Generation, Oil/Gas, Pharmaceutical, BioTech, Cement, Paper & Pulp, etc. Thermocouples are also used in everyday appliances like stoves, furnaces, and toasters .Thermocouples are typically selected because of their low cost, high temperature limits, wide temperature ranges, and durable nature.

Thermocouples are available in different combinations of metals or calibrations. The most common are the “Base Metal” thermocouples known as Types J, K, T, E and N. There are also high temperature calibrations – als known as Noble Metal thermocouples – Types R, S, C and GB.

dpstar Maltec-T  designs and manufactures thermocouple  We have more than 60 years providing the most innovative thermal solutions to our customers in a wide range of industries. Visit us at www.dpstar.com.my

Platinium Curve Rigid Averaging

This is what dpstar Maltec T the manufacturers created in Malaysia .Continuous-resistance elemnt Platinum Curve Rigid Averaging Sensors provide accurate sensing of duct temperatures when a small, inaccessible area must be covered. They average temperatures over their entire length and terminate in a  weather-resistant housing. They are available in 12″,18″,24″ and 36″ (30.5, 45,7,61, and 91.4 cm ) lengths. The sensor uses and element that closely matches platinum resistance/temperature characteristics over the specified range. Visit us at www.dpstar.com.my

Float Switches

A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices.

Float switches range from small to large and may be as simple as a mercury switch inside a hinged float or as complex as a series of optical or conductance sensors producing discrete outputs as the liquid reaches many different levels within the tank. Perhaps the most common type of float switch is simply a float raising a rod that actuates a microswitch.

A very common application is in sump pumps and condensate pumps where the switch detects the rising level of liquid in the sump or tank and energizes an electrical pump which then pumps liquid out until the level of the liquid has been substantially reduced, at which point the pump is switched off again. Float switches are often adjustable and can include substantial hysteresis. That is, the switch’s “turn on” point may be much higher than the “shut off” point. This minimizes the on-off cycling of the associated pump.

Some float switches contain a two-stage switch. As liquid rises to the trigger point of the first stage, the associated pump is activated. If the liquid continues to rise (perhaps because the pump has failed or its discharge is blocked), the second stage will be triggered. This stage may switch off the source of the liquid being pumped, trigger an alarm, or both.

Why pick us ? dpstar is one the leading manufacturer in Malaysia and was established in 1996. Since our inception we have grew to become a top supplier, facilitating our valued clients through our offices located in northern, central and southern part of west Malaysia also our products that we are selling are high quality and certified thermocouples . Such as Platinium Curve , RTD Sensor, Thermocouples, Float Switches.Our products are only UL Certified,UKAS,ISO,Standards and etc. Visit us at www.dpstar.com.my

Shimaden Temperature Controller – SR93/SR94 Series

Basic features:

• Multi-input and multi-range performance
• Large 20mm bright display (SR93)
• Readable from a distance and in a low light area
• 2-output heating and cooling control available
• RS232C or RS485 Interface available
• Dust and splash proof front panel equivalent to IP66
• A wide selection of additional functions (optional) is available to suit various needs.

The best supplier in Malaysia for Shimaden products is dpstar Group. for more info visit us at www.dpstar.com.my

Shimaden Temperature Controller – SR92 Series

Basic features:

• Multi-input and multi-range performance
• Large 20mm bright display (SR93)
• Readable from a distance and in a low light area
• 2-output heating and cooling control available
• RS232C or RS485 Interface available
• Dust and splash proof front panel equivalent to IP66
• A wide selection of additional functions (optional) is available to suit various needs

For more information just visit us at http://www.dpstar.com.my

Shimaden Temperature Controller – SR91 Series

Basic features:

• Multi-input and multi-range performance
• Large 20mm bright display (SR93)
• Readable from a distance and in a low light area
• 2-output heating and cooling control available
• RS232C or RS485 Interface available
• Dust and splash proof front panel equivalent to IP66
• A wide selection of additional functions (optional) is available to suit various needs.

Come visit us at http://www.dpstar.com.my to get more info about our high quality products and prices.

Shimaden Temperature Controller – SR1, SR3, SR4 Series

Basic features:

• Multi-input and multi-range performance
• Large 20mm bright display (SR3)
• Dust and splash proof front panel NEMA4X / IP66

Visit us at http://www.dpstar.com.my  for more info about the best selling temperature controller amd at a good price.

Series
SR1-
MPU-Based Auto-Tuning PID Digital Controller, DIN H48 X W48 X D111mm

SR3-
MPU-Based Auto-Tuning PID Digital Controller, DIN H96 X W96 X D111mm

SR4-
MPU-Based Auto-Tuning PID Digital Controller, DIN H96 X W48 X D111mm
Input
8 Thermocouple: B, R, S, K, E, J, T, N, PLII, Wre5-26 {U, L (DIN 43710)}
R.T.D.: Pt100 Ω /JPt100 Ω
Voltage: -10~10, 0~10, 0~20, 0~50, 10~50, 0~100mV DC

6
Voltage (V): -1~1, 0~1, 0~2, 0~5, 1~5, 0~10V DC

Current (mA): 0~20, 4~20mA DC
Receiving impedance: 250 Ω

Control Ouput
Y- Contact: 1a, Contact capacity: 240V AC 2.5A/resistive load
Proportional cycle: 1~120 sec.

I- Current: 4~20mA DC
Load resistance: 600 Ω max.

P- SSR drive voltage: 12V 1.5V DC/30mA max.
Proportional cycle: 1~120 sec.

V- Voltage: 0~10V DC
Load current: 2mA max.

Event Output
1 Event output (1a) X 2 points, Contact capacity:240VAC 1A/resistive load

Shimaden Temperature Controller – SRS 11, SRS 13, SRS 14 Series

Basic features:

• Multi-input and multi-range performance
• Small instrument depths (62mm – 65mm) save space, thus securing a larger installation area.
• SV setting: 3 points
• PID Value: 3 types
• 2-output heating and cooling control available
• Total 32 steps Program available (optional)
  (1-4 pattern, 32-8 step)
• RS-485 Interface available (optional)
  (Master – slave function, Modbus/Shimaden Protocol)
• Heater break/heater loop alarm: Single/3-phase available
• A wide selection of additional functions (optional) is available to suit various needs.

We at dpstar is offering one of the top temperature controller from Shimaden . Which is the best selling unit in Malaysia . For more inquiries visit us athttp://www.dpstar.com.my

Best In Malaysia Flanged Immersion Heaters

Flange Immersion heaters can be designed with any element length, wattage and voltage. High purity compacted Mg0 powder provides maximum heat conductivity and optimum dielectric strength.Flange Immersion Heaters come in a wide variety of configurations, styles, and shapes. Our goal is to create a simple yet effective design to solve any fluid.
Bends are recompaced to restore Mg0 density. Thermocouples can be installed for high limit temperature control. Spacers installed on elements to assist flow distribution. Elements are terminated with #10-32 screw terminals that provides easy wiring.A fixed conduit support bracket allows the supply conduit to not be disturbed when the cover is off.Also high capacity electrical heating units made for tanks or pressurized vessels. They consist of multiple tubular heaters formed into hairpin and welded or brazed to flanges. The heating elements could be made of copper, steel, stainless steel or Incoloy sheath. Standard flanges are carbon steel rated for 150 or 300 Lbs. Other flange materials and shapes are available. Various types of electrical protection housing, built in thermostats, thermocouples and high limit switches can be incorporated.

Flange Sizes : 3″, 5″, 6″, 8″, 10″,12″, 14″
FlangeMaterial : Steel, Stainless Steel
Element Material : Incoloy, Stainless Steel, Steel Copper
Housings : NEMA 1, 4, 7

Why pick us ? We are a leading manufacturer in Malaysia and was established in 1996. Since our inception we have grew to become a top supplier, facilitating our valued clients through our offices located in northern, central and southern part of west Malaysia also our products that we are selling are high quality and certified electrical heaters. Such as Industrial Heaters,Tubular Heater,Ceramic Bobbin Heater,Duct Heater,Cartridge Heater,Finned Tubular Heater,Circulation Heater,Infrared Silica Quartz Heater,Teflon Immersion Heater,Flange Immersion Heater,and etc. Our products are only UL Certified, UKAS,ISO,Standards and etc. Visit us for more outstanding information at http://www.dpstar.com.my

TRIPLE IMMERSION HEATERS

GREAT QUALITY OF TRIPLE IMMERSION HEATERS

dpstar is proud to present MALTEC the top supplier and manufacturer that can create a range of screw-in immersion elements are designed with various sheath ratings to suit heating of most grades of oil, alkaline – cleaning solutions and water.
Special wattages, voltages, lengths and diameters can be supplied on customer’s request.
304 Stainless Steel Heating Element
Why pick us ? We are a leading manufacturer in Malaysia and was established in 1996. Since our inception we have grew to become a top supplier, facilitating our valued clients through our offices located in northern, central and southern part of west Malaysia also our products that we are selling are high quality and certified electrical heaters. Such as Industrial Heaters,Tubular Heater,Ceramic Bobbin Heater,Duct Heater,Cartridge Heater,Finned Tubular Heater,Circulation Heater,Infrared Silica Quartz Heater,Teflon Immersion Heater,Flange Immersion Heater,and etc. Our products are only UL Certified,UKAS,ISO,Standards and etc. Visit us at http://www.dpstar.com.my

Quartz Immersion Heaters

Malaysia Most Advance Quartz Immersion Heaters

dpstar quartz immersion heaters is in a single tube, three tube, and LQ sheath L-shaped heaters. Solution should be kept 2″ above the heated length at all times. Units can be ordered in different combinations such as: Complete Heater, Heater Less Guard, or each piece individually. Materials include steel, stainless steel, titanium and quartz.  Teflon coated is also available as well as protective guards for some models. Single and multiple coil, loop and tube configurations are available.The inclusion of modern equipment and sophisticated technology had made our company dpstar to be much faster and efficient.As one of the leading manufacturer in Malaysia we promise you that our quartz immersion heaters is for any voltage or wattage within the limits of manufacturing.We are UL certified, CE certified in Malaysia as an industry professional in heaters. For more information you can visit our website at http://www.dpstar.com.my.

RADIANT PANEL HEATERS

HIGH QUALITY ITEM & CERTIFIED

Similar to quartz glass face heaters but they have a woven refractory cloth with a black ceramic coating on the front. dpstar provide wraparound heat all-year-round bringing summer warmth into your conservatory even on the coldest days. Boasting compact and slimline proportions, this wall-mounted electric conservatory panel heater has been designed specifically to fit dwarf walls in conservatories, attaching directly onto the wall with no need for an electrician or expensive plumbing like more traditional heating systems. dpstar is the largest distributor in Malaysia.

Specifications:

•  5 -25 W/in 2
•  0.55 – 18kW
•  120, 230, 240 and 480 Volt
•  1 & 3 Phase
•  1560°F Max. Emitter Temperature
•  6-60″ Long x 12 – 30″ Wide

Our dpstar panel heaters are used to heat objects via radiant heat transfer, usually via infrared (IR) waves. They are used in a variety of industries and applications, including: space heating, drying, curing, water evaporation, food processing, material preparation, bonding, joining, and industrial processing. Power requirements for radiant flat panel heaters include maximum operating (sheath) temperature, phase, alternating current (AC) voltage, heating capacity, and watt density. Maximum operating (sheath) temperature is the highest temperature that the heater’s sheath or sleeve may reach. Note that this is not the maximum temperature that a heated substance may reach. Some radiant flat panel heaters use single-phase power. Others use three-phase power. Heating capacity is the wattage which a radiant flat panel heater can deliver. Watt density is a good measure of how quickly radiant heater can transfer heat to a surface. To calculate watt density, suppliers divide the available wattage by the heated surface area. dpstar is one of the  largest manufacturer in Malaysia. The inclusion of modern equipment and sophisticated technology had made our company dpstar to be much faster and efficient.As one of the leading manufacturer in Malaysia we promise you that our RADIANT PANEL HEATERS is for any voltage or wattage within the limits of manufacturing.Also our heaters can be also be supplied with suitable mild steel, stainless steel pockets, mounting flanges and bosses. We are UL certified, CE certified in Malaysia as an industry professional in heaters.  For more information you can visit our website at http://www.dpstar.com.my.

ORDER NOW !!!

Float Switches

A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices.

Float switches range from small to large and may be as simple as a mercury switch inside a hinged float or as complex as a series of optical or conductance sensors producing discrete outputs as the liquid reaches many different levels within the tank. Perhaps the most common type of float switch is simply a float raising a rod that actuates a microswitch.

A very common application is in sump pumps and condensate pumps where the switch detects the rising level of liquid in the sump or tank and energizes an electrical pump which then pumps liquid out until the level of the liquid has been substantially reduced, at which point the pump is switched off again. Float switches are often adjustable and can include substantial hysteresis. That is, the switch’s “turn on” point may be much higher than the “shut off” point. This minimizes the on-off cycling of the associated pump.

Some float switches contain a two-stage switch. As liquid rises to the trigger point of the first stage, the associated pump is activated. If the liquid continues to rise (perhaps because the pump has failed or its discharge is blocked), the second stage will be triggered. This stage may switch off the source of the liquid being pumped, trigger an alarm, or both.

Why pick us ? dpstar is one the leading manufacturer in Malaysia and was established in 1996. Since our inception we have grew to become a top supplier, facilitating our valued clients through our offices located in northern, central and southern part of west Malaysia also our products that we are selling are high quality and certified thermocouples . Such as Platinium Curve , RTD Sensor, Thermocouples, Float Switches.Our products are only UL Certified,UKAS,ISO,Standards and etc. Visit us at http://www.dpstar.com.my

Platinium Curve Rigid Averaging

This is what dpstar Maltec T the manufacturers created in Malaysia .Continuous-resistance elemnt Platinum Curve Rigid Averaging Sensors provide accurate sensing of duct temperatures when a small, inaccessible area must be covered. They average temperatures over their entire length and terminate in a  weather-resistant housing. They are available in 12″,18″,24″ and 36″ (30.5, 45,7,61, and 91.4 cm ) lengths. The sensor uses and element that closely matches platinum resistance/temperature characteristics over the specified range. Visit us at www.dpstar.com.my

RTD , PT100 and PT1000 Sensor

 

dpstar RTDs  are temperature sensors that contain a resistor that changes resistance value as its temperature changes. They have been used for many years to measure temperature in laboratory and industrial processes, and have developed a reputation for accuracy, repeatability, and stability.

Most RTD elements consist of a length of fine coiled wire wrapped around a ceramic or glass core. The element is usually quite fragile, so it is often placed inside a sheathed probe to protect it. The RTD element is made from a pure material whose resistance at various temperatures has been documented. The material has a predictable change in resistance as the temperature changes; it is this predictable change that is used to determine temperature.

Resistance temperature detectors (RTD) accurately sense temperature with an excellent degree of repeatability and interchangeability of elements. The RTD is composed of certain metallic elements whose change in resistance is a function of temperature. In operation, a small excitation current is passed across the element, and the voltage, which is proportional to resistance, is then measured and converted to units of temperature calibration. The RTD element is manufactured by winding a wire (wire wound elements) or plating a film (thin film elements) on a ceramic or glass core and sealing the element within a ceramic or glass capsule.

Since most RTDs have a low initial resistance, often 100 ohms, and have a small change in resistance per unit of temperature range, the resistance of the lead wire is often compensated for with a three or four wire bridge configuration built into the measuring devices. By selecting the proper elements and protective sheathing, RTDs can operate in a temperature range of (-200 to 650) °C [-328 to 1202] °F.

dpstar manufactures RTDs for many industry applications. From single- or dual-element RTDs to MT100’s  we have the right sensor for your job. If what you need is not available from our catalog, our product engineers will design an RTD for your specific application, including temperature sensor assemblies that require connection heads, thermowells and/or transmitters. For more information visit http://www.dpstar.com.my.

Best Quality & Cheap Thermowell

A Thermocouple is a sensor used to measure temperature. Thermocouples consist of two wire legs made from different metals. The wires legs are welded together at one end, creating a junction. This junction is where the temperature is measured. When the junction experiences a change in temperature, a voltage is created.There are many types of thermocouples, each with its own unique characteristics in terms of temperature range, durability, vibration resistance, chemical resistance, and application compatibility. Type J, K, T, & E are “Base Metal” thermocouples, the most common types of thermocouples.Type R, S, and B thermocouples are “Noble Metal” thermocouples, which are used in high temperature applications (see thermocouple temperature ranges for details). Thermocouples are used in many industrial, scientific, and OEM applications. They can be found in nearly all industrial markets: Power Generation, Oil/Gas, Pharmaceutical, BioTech, Cement, Paper & Pulp, etc. Thermocouples are also used in everyday appliances like stoves, furnaces, and toasters .Thermocouples are typically selected because of their low cost, high temperature limits, wide temperature ranges, and durable nature.

Thermocouples are available in different combinations of metals or calibrations. The most common are the “Base Metal” thermocouples known as Types J, K, T, E and N. There are also high temperature calibrations – als known as Noble Metal thermocouples – Types R, S, C and GB.

dpstar Maltec-T  designs and manufactures thermocouple  We have more than 60 years providing the most innovative thermal solutions to our customers in a wide range of industries. Visit us at http://www.dpstar.com.my

Cast-In-Heaters

dpstar designs cast-in heaters of aluminum and bronze for various heating applications in industries, such as Semiconductor and Plastics Processing, Packaging Machinery, Foodservice, Paper Processing, Hot Melt Adhesives, Medical Equipment, Heat Transfer Presses and Textile Manufacturing.  dpstar is widely recognized as the industry leader in manufacturing Cast-In heater/coolers for the plastics industry, our capabilities and the application possibilities for utilizing Cast-In Heater Technology extend far beyond the scope of plastics machinery. dpstar also has set industry standards by creating custom designed Cast-In Heaters of every imaginable size, shape and electrical rating that can safely and practically address the diversified requirements of industrial and commercial markets.The cast in heaters are composed of one or more electrical heating elements embedded in an aluminum alloy, brass, bronze, copper-nickel or iron type material with excellent thermal conductivity. For more info visit http://www.dpstar.com.my

Top Hot Catridge Heater

dpstar cartridge heaters are most frequently used for heating metal parts by insertion into drilled holes. For easy installation, the heaters are made slightly undersize relative to their nominal diameter.Our Cartridge Heaters are largely demanded by our clients spread all over the world

Options & Accessories

Options on standard cartridges

• Ceramic beads Option 1
• Straight GMF Option 2
• Straight braid leads Option 3
• Bended Option 5
• Bended GMF Option 6
• Leads exit 90° Option 7

Accessories on standard and special cartridges

• Threaded fitting simple internal Accessory 11
• Threaded fitting simple external Accessory 12
• Mounting flange Accessory 13
• Abutment Accessory 14
• Anchor clip Accessory 19

Options & accessories of CCMC

• GMF 90° Option 8
• Braid leads 90° Option 9

The majority of applications do not require maximum watt/in². Use a watt density only as high as needed. Take advantage of the safety margin provided by using ratings less than the maximum allowed. Select space heaters for most even heat pattern rather than the highest possible wattage per heater. Why pick us ? We are a leading manufacturer in Malaysia and was established in 1996. Since our inception we have grew to become a top supplier, facilitating our valued clients through our offices located in northern, central and southern part of west Malaysia also our products that we are selling are high quality and certified electrical heaters. Such as Industrial Heaters,Tubular Heater,Ceramic Bobbin Heater,Duct Heater,Cartridge Heater,Finned Tubular Heater,Circulation Heater,Infrared Silica Quartz Heater,Teflon Immersion Heater,Flange Immersion Heater,and etc. Our products are only UL Certified,UKAS,ISO,Standards and etc. Visit us at www.dpstar.com.my

dpstar  Selling Cheapest In Malaysia

Ceramic Band Heaters

dpstar Ceramic Band Heaters offer heater longer life , high processing temperature capabilities and full flexibility for easy installation. dp star one of the major leading manufacturer and top supplier is able to provide high quality long life  and use less wattage of ceramic band heaters(because of insulation) in plastics extrusion and injection molding applications. These band heaters are constructed with a stainless steel shroud enclosing high quality ceramic knuckles through which run coiled high temperature nickel-chromium element wire.

Design Features:

• Energy efficient , less power consumption
• High temperature capability up to 1600°F(875°C)
• Thermally insulated
• Uniform temperature
• Flexible, easy to install and remove
• Elongation compensation w/spring loaded screw over 18″diameter

Ceramic band heaters are medium-to-high temperature heaters that can deliver up to 1600°F. The nickel-chrome heating cores of these durable heaters are placed inside interlocking ceramic tiles that are assembled like a brick wall. A ceramic fiber insulating mat and a stainless steel jacket cover this assembly. This construction makes ceramic heaters flexible and highly energy efficient. An energized ceramic heater that operates at 1600°F internally. Ceramic heaters consume 20 % less energy than band heaters that are not insulated. dpstar is one of the top leading  company in Malaysia to supply  high quality products and services to our valued customers. For more information about this product visit us at http://www.dpstar.com.my

DataLogger

For more information please visit us at http://www.dpstar.com.my.

For more information please visit us at http://www.dpstar.com.my.

Manufacturer Of Heaters & Thermocouples

dpstar specialize in all kinds of custom made electrical heater , temperature sensors, parts and accessories.For more inquiry please visit our websitehttp://www.dpstar.com.my

You Need Heat You Need Us!!!

Backersafe Immersion Heater

dpstar is a sole agent of Backersafe Immersion Heaters are manufactured to the latest legislation of BSEN60335-2-73. Two specific clauses within this specification are aimed at eliminating the risk of boiling water. The most significant requirement is that the immersion heater be isolated from the mains supply should the primary thermostat fail with the contacts closed which would allow the water to reach a temperature in excess of 85 degrees centigrade.The ‘Backersafe’ Immersion heaters are manufactured in a full range of sheath material including copper, incoloy 800, incoloy 825 and titanium to suit the varying water conditions around the country.Through continuous investments in research and development, our engineering team is able to develop a pattern of constant innovation, in-line with our commitment towards achieving the finest. More than 100 employees currently work in dpstar, in one production centre and twelve sales offices through out Peninsular Malaysia. Our strength lies in our abilities and dare to innovate ahead of our time.The inclusion of modern equipment and sophisticated technology had made our company dpstar to be much faster and efficient.As one of the leading manufacturer in Malaysia we promise you that our Backersafe Immersion Heaters  is for any voltage or wattage within the limits of manufacturing.Also our heaters can be also be supplied with suitable mild steel, stainless steel pockets, mounting flanges and bosses. We are UL certified, CE certified in Malaysia as an industry professional in heaters.  For more information you can visit our website athttp://www.dpstar.com.my.

Pressure Gauge Supplier Malaysia

dpstar have Tecsis Pressure Gauge available please visit us at http://www.dpstar.com.my.

About Our Company

dpstar is a leading manufacturer, project consulting/execution, and a trading company based in Malaysia with expertise in various factory automation & control components, building automation as well as process/hybrid control systems. We have been a key manufacturer of thermocouples and industrial heaters in Malaysia since our inception in 1996 with presence in states across Malaysia such as Kuala Lumpur (KL), Petaling Jaya, Penang, Johor Bahru, and Selangor.

dpstar Group constantly strives to provide superior quality and highly reliable products at competitive prices for all our clients and dealers, and as a result have built a reputation for being one of the largest suppliers of industrialelectrical heater and thermocouples through our manufacturing brands Maltec-T and Maltec-H. dpstar Manufacturing Sdn. Bhd. is based in Kuala Lumpur (KL, Malaysia), and is the only electrical and industrial heater manufacturer to have been accredited with the prestigious UL certificate in the country, along with ISO 9001, UKAS, and Standards.



More specifically we are a major manufacturer, supplier, and distributor with extensive specialization in product categories of temperature controllers, humidity controllers, electrical heaters, drum heaters, industrial heaters, cartridge heaters, tubular heaters, bobbin heaters, immersion heaters, finned heaters, band heaters, ceramic heaters, anti condensation heaters, circulation heaters, infrared heaters, industrial furnaces, rtd sensors, pressure switches, float switches, thermowell , chart recorders, pressure gauges, temperature transmitters, pressure transmitters, load cells and so on.



We pride ourselves as being a prominent and advanced humidity sensor, temperature sensor, and thermocouple manufacturer in Malaysia, and supply thermocouples ranging from thermocouple type K, type J, type T, type E, type R, type S, as well as RTD sensor type PT 50, PT100, PT500, PT1000. In Malaysia, and in the ASEAN region of Singapore, Indonesia, Thailand, and Philippines we are a sole or regional distributor/agent for over 40 reputable agency products.

Under dpstar Group, brands that we are proudly regional distributor or sole Malaysia distributor are reputed brands such as Shimaden from Japan (humidity and temperature controller), Rotronic of Switzerland (temperature and humidity transmitter), PR Electronics of Denmark (temperature transmitter and signal conditioner), Simex of Poland (data logger and paperless recorder), LAE of Italy (refrigeration and chiller controller) and many other renowned international brands.

Our vision statement is simply to be the preferred process control, automation, and distributor of industrial and electrical products in Malaysia, and to continuously provide cutting-edge technology and solutions to all our clients.



dpstar is a responsive organization with an emphasis on dynamic innovation. From its catalogue of standard products to products that we custom made according to customers' specification, dpstar pledged quality and excellence in all our products and services, and provide designs that are able to negate any process complications.

dpstar is now a sole agent or distributor for over 40 reputator agency products.

ABB

~ Electronic Products & Relays

AOIP

~ Temperature and Process Calibrators

ADELSYSTEM

~ DC Switching Power Supply

APLISENS

~ Differential Pressure & Pressure Transmitters

ALISH

~ Panel Meter, Transmitter, Transducer, Power Meter, Proximity Sensor, Photoelectric Sensor

BECK

~ Differential Pressure Switch and Transmitters

BECKER

~ Immersion Heater

BEIJER / HITECH

~ Industrial Touch Screens / HMI

CIMON

~ PLC, Programmable Logic Controller, Touch Screen, SCADA, Industrial PC

CENTER

~ Handheld Thermometer

CET ELETRIC

~ Silicone Cable

CERAMICX

~ Infrared Heater

DAIICHI DENKO

~ Anti Condensation Heater

DINI ARGEO

~ Weighing Indicator, Load Cell

ELPRO

~ Humidity & Temperature Data Logger Specialists

EREMA HEATERS

~ Silicon Carbide Heaters

FATEK

~ PLC, Programmable Logic Controller

FLUKE

~ Test & Measurement Equipment, Multimeter, Infrared Thermometer, HVAC Specialist

FLINTEC

~ Load Cell, Weighing Indicators, Weighing Controllers, Load Cell Transmitter

FLEXELEC

~ Flexible Heating Cable

HAYASHI DENKO

~ Thermocouple RTD Sensors PT50, PT100, PT500, PT1000

HAPN

~ Low, Mid, High Voltage Softstarter

ISOTECH

~ Temperature calibrator

INVT

~ Frequency Inverters / AC Drives

PR ELECTRONICS

~ Temperature & Universal Signal Transmitters

KURABE

~ Heat Resistance Cables

KOKUSAI CHART

~ Chart Papers

KUBLER

~  Timer, Counter, Encoder, Slip Rings, Linear Encoder, Incremental Encoder, Absolute Encoder, Preset Counter, Mechanical Timer, Mechanical Counter

LUTRON

~ Anemometer, Thermometer, Light Meter, Sound Level Meter, PH Meter, DCA/ACA Clamp Meter

LAE

~ Refrigerator Controllers

MALTEC-H

~ Electrical Heaters, Furnace, Oven, Circulation Heater

MALTEC-T

~ Thermocouples & RTD Sensors, PT 100, PT1000

NEW-FLOW

~ Flow Meter, Level & Pressure Switches (Explosion proof)

NINOMIYA DENSEN

~ Thermocouple, Heater & Teflon Wires JIS Standard

OMEGA (USA)

~ Thermocouple Wires, Connector

OHKURA

~ Paperless Chart Recorder

PROCESS TECHNOLOGY

~ Electric Teflon Immersion Heaters for Corrosive Liquid

PRIMUS

~ Panel Meter, Protection Relay, Panel Air Conditioning, Under Voltage Relay, Over Current Relay, Phase Break Relay

PULS

~ DC Power Supply

RAINBOW

~ Thermostats

RAYTEK

~ Thermal Imaging System, Non Contact Sensor

RESCAL

~ Resistance Heating Alloys & Elements for Industrial Furnaces

ROTRONIC AG

~ Humidity & Temperature; Water Activity & Meteology; Data Logger, Transmitter & Handheld Instruments, Measuring & Monitoring

RELATS

~ Silicon Sleeving

SHIMADEN

~ Temperature/ Humidity Controllers & Chart Recorders & Power Regulator

SIEMENS

~ Frequency Inverters / AC Drives

SIPIN

~ Power Regulator / SCR

SIMEX

~ Paperless Chart Recorder, Flow Meters, Process Meter, Weight Indicator, Rate Meters, Weighing Indicator

SUNVIC

~ Thermostats

TECORP

~ Frequency Inverters / AC Drives

TEW & C

~ Thermocouple Armour & Multi Pair Cable IEC & ANSI Standard

TEXFIBER

~ Ceramic Fiber Board / Blanket

TECSIS

~ Temperature & Pressure Gauges

UNIPULSE

~ Weighing Indicator, Weighing Controller, Belt Scales

WINTERS

~ Pressure & Temperature Gauges

W.HALDENWANGER

~ Alsint 99.7, Ceramic Insulator; Ceramic Rollers; Phythagoras & Silicon Carbide Protection Tube Flame Safeguard products

Our business unit consists of:-
. Manufacturer of Heating, Sensing and Controls Products
. Humidity and Infra-red Systems
. Heating, Ventilation and Air Conditioning
. Refrigeration and Cooling System
. Drive and Motion System
. Process Components & Systems
. Factory Control Components PLC & Scada
. Weighing Components and Systems
. Manufacturing of Heaters & Sensors
. Instrument + Control cables and Heating Cables


Through continuous investments in research and development, our engineering team is able to develop a pattern of constant innovation, in-line with our commitment towards achieving the finest. More than 100 employees currently work in dpstar, in one production centre and twelve sales offices through out Peninsular Malaysia. Our strength lies in our abilities and dare to innovate ahead of our time.



From presale to implementation and beyond, dpstar is committed in providing excellent services and solutions. Our automation solutions are constantly being improved, simplified and getting more powerful by the day. As a result, efficiency constantly increases and this spells benefits for organizations, system and factories everywhere.